FRP Rods-for Composite Insulator Core Rods/ Fiberglass Rods/ Epoxy Rods

• Application: Insulators
• Type: Insulation Rod
• Chemistry: Exposy
• Material: Fiberglass
• Maximum Voltage: >100KV
• Classification: Fiberglass Rod
• Model NO.: D: 14mm-130mm
• Certification: ISO9001
• Color: Green
• Production Process: Pultrusion
• Transport Package: Ply-Wood Pallet or as According to Requirement
• Specification: dimeter 14mm-60mm
• Trademark: CIE
• Origin: Qingdao
• HS Code: 39169090
• Production Capacity: 120ton/Month

Product Description

Fiberglass Rod  FRP Rods for Composite Insulator:

1. Capacity of fiber glass rod/fiberglass rod: 100 Pultrusion lines, the largest manufacturer of composite insulator rods in China.

2. Technique of fiber glass rod/fiberglass rod : The only one using vacuum injection technique without mould release agent, Patent No. 200610041850.1.

3. Test of fiber glass rod/fiberglass rod : Rods passed tests in domestic labs, including WHVRI, CEMT, XIHARI, especially passed KEMA tests in the Netherlands and 7200h stress corrosion test.

4. Standards: IEC61109 IEC61952, ANSI C29.13-2000, GB/T19519, DL/T810 DL/T864

5. Application: The rods of Taporel have been applied in the highest voltage(1000kv) AC transmission lines & applied in the highest voltage(± 800kv) DC transmission lines.

2. Specifications:

Diameter 5mm-130 mm; Length according to customer's order

3. Classify:

3.1Based on properties, rods are classified into High temperature resistant type (E-glass Rod) and High temperature & acid resistant type (ECR-glass Rod).

3.2Based on properties, rods are classified into High temperature resistant type (E-glass Rod) and High temperature & acid resistant type (E-glass Rod)
3.3Based on application, fiberglass rods are classified into 7 types:
For composite suspension & tension insulators (Diameter 16mm- 40mm)
For composite pin insulators((Diameter 24mm---53mm)
For composite cross arm insulators(Diameter 28mm- 80mm)
For composite post insulator (Diameter 28mm- 130mm)
For composite surge arresters(Diameter 5mm- 40mm)
For composite fuse cutout (Diameter 19mm- 36mm)
3.3. Color: Light green, brown, black

no	parameter	unit	specification
1	Density(at 20±2)	g/cm 3	2.2
2	Water absorbtion rate (at20±2,24h)	%	0.05
3	Tensile strength	Mpa	1690
4	Bending strength	Mpa	1100
5	Dry penetration test	Min	50
6	Water difussion test(1%nacl,boiling for 100h 12kv/1min)	μA	<10
7	Shearing strength along laminals	Mpa	50
8	Volume resistivity(140,96h)	Ω.M	10 10
9	DC withstand voltage(10min)	kV	50
10	Lightning surge withstand voltage(100kv,10mm)	times	5
11	Bending strength at heating conditions	Mpa/150	350
12	Stress corrosion (1 mol/1hno3,at 67% stress)	h	7200
13	Torsion strength	Mpa	800

2. Our products:
 


3. Our worshop: